Zephyr Essentials Tempest I AK7000BS Guide D'utilisation, D'entretien Et D'installation page 22

All manuals and user guides at all-guides.com
www.zephyronline.com
REPLACING LIGHT BULBS
CAUTION: Light bulb becomes extremely hot when turned on.
DO NOT touch bulb until switched off and cooled. Touching hot bulbs could cause serious burns.
Make sure all power is turned off and bulbs are not hot.
Remove by turning bulb counter clockwise. Note: Bulb does not unscrew; it turns 60 degrees, stops and falls
out.
If bulbs are diffi cult to turn due to prolonged use, fi rmly attach the provided glass suction cup or use a rubber/
latex glove and turn counter clockwise.
Replacement bulbs are available at specialty lighting stores. Purchase type MR16 (GU-10) 35W halogen.
For Zephyr part numbers please turn to page 25 of the manual.
20