Tools Needed For Assembly - Bosch Gts18V-08 Consignes D'utilisation/De Sécurité

Tools Needed For Assembly

Fig. 5 Fig. 6
Combination square must be true.
Straight edge of
board 3/4" (19
Flat screwdriver
mm) thick. This
Draw light line
edge must be
on board along
perfectly straight.
this edge.
Phillips screwdriver
There should be no gap or
Combination Square
overlap here when square is
flipped over in dotted position.
-17-
1609B07947GTS18V-08 OSI 08-2022.indd 17 8/3/22 2:44 PM