Ce Declaration Of Conformity - ENAG CDS3 Manuel D'utilisation

7.

CE DECLARATION OF CONFORMITY

With the provisions of the directive 2006/95/CE "Low voltage"
and the provisions of directive 2004/108/CE "Electromagnetic Compatibility"
Manufacturer: ENAG
Address: 31 rue Marcel Paul, Z.I. Kerdroniou Est – 29000 Quimper/FRANCE
declares that the CDS3 battery chargers:
are in compliance with the provisions of directive 2006/95/CE and those of directive 2004/108/CE.
The harmonized standards are as follow:
NF EN 61000-6-1: Electromagnetic compatibility (EMC) - Part 6-1: generic immunity standards –
for residential, commercial and light industrial environments.
NF EN 61000-6-2: Electromagnetic compatibility (EMC) - Part 6-2: generic immunity standards –
for industrial environments.
NF EN 61000-6-3: Electromagnetic compatibility (EMC)) - Part 6-3: generic emission standards –
for residential, commercial and light industrial environments.
NF EN 61000-6-4: Electromagnetic compatibility (EMC) - Part 6-4: generic emission standards –
for industrial environments.
NF EN 60950-1: Information technology equipment - Safety - Part 1: general requirements.
NF EN 60335-2-29: Safety of household and similar electrical appliances – Part 2-29 : Particular
Quimper, 04/03/2010
Name and position of the signatories:
Moulay TAOUFIK
Power Electronics Dept Manager
CE marking awarded in: 2009
DECLARATION OF CONFORMITY
requirements for battery chargers.
24V/150A-TRI
Didier MARGERAND
Chairman
29