Publicité
Les langues disponibles
Les langues disponibles
1 PREFACE
Manufacture : ELC 59 avenue des Romains 74000 ANNECY - FRANCE
Phone
: +33 (0)4 50 57 30 46 Fax : +33 (0)4 50 57 45 19
Website
:
http://www.elc.fr
Item
: DUAL DC STABILIZED PROGRAMMABLE POWER SUPPLY
: elc
Brand
Type
: ALR3206D
2 DESCRIPTION
2.1 PRESENTATION
You just bought a DUAL DC STABILIZED PROGRAMMABLE POWER SUPPLY type elc ALR3206D.
We thank you and congratulate you for your good choice.
elc's company is a specialist manufacturer proposes a wide range of POWER SUPPLIES and many
other electronic test instruments : FUNCTION GENERATORS, DECADE BOXES, DIGITAL PANEL
METERS...
This item has been conceived according to the European standard EN61010-1 and supplied in good
condition. This electrical instrument is intended to professionals, industrials and school users. This
instructions manual contains information and notes, which must be respected by the purchaser, in order
to ensure a safe working and to maintain the instrument in good condition.
2.2 FUNCTIONAL DESCRIPTION OF THE UNIT
This item is used in laboratories. It is designed with : a large graphic display, a sensitiv keypad, a
compact vertical box with : an handle and a cord storage integrated in the rear panel. This item will give
you satisfaction by offering many possibilities.
Fully programmable, this power supply can be controlled in several ways :
- via the front panel using the sensitive keypad
- via the isolated USB interface
- via the isolated RS485 interface
- via the isolated analogical interface (0 - 10V or the 10K potentiometer)
Each output of this DC power supply is regulated in voltage of 0 to 32V and current of 0 to 6A.
"Parallel" "Series" and "Tracking" modes allowing you to pair inside, the two channels of the power
supply to obtain :
Parallel : 0 to 32V and 0 to 12A
Serial : 0 to 64V and 0 to 6A
Tracking : ± 0 to 32V and 0 to 6A (mode coupled) or 2x 0 to 32V 0 to 6A (mode isolated with common
adjustment)
Several programmable functions U and I are accessible directly from the keypad and you will make
positive or negative ramp, up or down time, or a square, or arbitrary wave.
An automatic remote sensing can be enabled in mode 4 wires on the rear panel outputs.
The outputs can be turned "ON" or "OFF" together or separately and there is a sleep mode by a
"standby" touch.
All parameters are displayed on the graphic display.
4000 4 360_09/22
-
commercial@elc.fr
17
ENGLISH
Publicité
