SECTION 4 (CONTINUED) / SECTION 4 (SUITE) / SECCIÓN 4 (CONTINUACIÓN)
TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS
4.8
• Attach the locks (DGS & DGR) to the top and bottom of the left door. If the pins in the locks do not move freely, loosen the screws (CHK) just a
tad.
• Attacher les verrous (DGS et DGR) à la partie supérieure et inférieure à la porte gauche. Si les verrous ne se déplacent pas librement,
deserrer les vis (CHK) un pétit peu.
• Sujetar los pasadores (DGS y DGR) al tope y al fondo de la puerta izquierda. Si los pasadores no se mueven libremente, afl ojar los tornillos
(CHK) un poquito.
CHK
CHK
DGS
4.9
• Attach the two handle pieces (BYR & BYS) together as shown.
• Attacher les deux pièces de la poignée (BYR et BYS) comme illustré.
• Conectar las dos piezas del picaporte (BYR y BYS) como se muestra.
CHK (x4)
CHK
CHK
DGR
BYS
26
BYR