Product Fiche; Technical Specifications - Inventum IOM6072RK Manuel D'utilisation

Problem
A knob is loose.
A knob does not turn.
An oven mode with fan is selected,
but the fan does not work
continuously.
After cooking, the appliance makes a
noise and there is an air flow around
the control panel.
The dish is not cooked thoroughly in
the suggested time.
The dish did not brown evenly.
The lamp does not work.
The appliance does not become hot.
The temperature indicator is off.
9

Product fiche

TECHNICAL SPECIFICATIONS

Item
Model
Voltage
Power
Energy class
Energy consumption, cavity (conventional)
Energy consumption, cavity (hot air)
Energy effiency index
Capacity
Possible cause
The knob is not installed correctly.
There is dirt under the knob.
The fan only works when necessary
for optimal heat distribution.
The fan works to cool down the
appliance.
The selected temperature differs
from the suggested temperature.
The portion size differs from the
recipe.
The selected temperature is too
high.
The used insert level is too high.
The lamp is broken.
The door is not closed correctly.
There is no oven mode selected.
There is no temperature selected.
There is no oven mode selected.
Specification
IOM6072RK
220-240 Volt ~50-60Hz
2300 Watt
A
0,93 kWh
0,78 kWh
95.9
72 liter
Possible solution
1. Carefully push the knob back in
the control panel.
2. Do a check if you can easily turn
the knob.
Clean the knob. Refer to section
'Cleaning the knobs'
.
-
The fan switches off automatically.
Use the suggested temperature of
the recipe.
Adjust the temperature according to
the portion size.
Use the suggested temperature of
the recipe.
Place the dish on a lower insert
'Using the
level. Refer to section
insert levels'
.
Replace the lamp. Refer to section
'Replacing the lamp'
.
Make sure that the door is closed
completely.
Make sure that you set the oven
mode.
Make sure that you set the
temperature.
Make sure that you set the oven
mode.
English • 39