Worx Landroid M Guide D'installation page 8

Marking out Landroid
territory within your garden
Your Landroid M needs to know where to mow. This is why you have to mark its working area with a boundary wire
®
that will form an invisible fence. This wire will also guide your Landroid
If your neighbor also uses a Landroid
a space of at least 6ft between your Boundary Wire and your
neighbors.
Please be aware that your Landroid
a signal from the Boundary Wire beyond the distance of 60 ft.
First of all, locate the best spot for the charging base, taking
into account where your nearest outdoor electricity socket is.
The charging base has a 50ft power cord.
NOTE: Make sure the adaptor and the electrical socket are
kept in a dry area at all times.
8
EN
The charging base should be placed along a straight line-allow 6 ft
at both the front and the back. If possible, place the charging base
in the shade-batteries are better recharged in a cool place.
Make sure it is on a flat area, clear of any obstacles.
M, then you must keep
®
M will not be able to receive
®
M's
®
M to its charging base.
®
An island is an area that sits inside your lawn where you don't
want Landroid M to go. The boundary wire starts from the
®
mowing boundary, goes straight to the island, around it and
back to the boundary as shown by the arrows on the picture.