Deletinga Single Learned Key; Deleting All Learned Keys In A Specific Mode - One for All Kameleon URC-9962 Guide D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

If the function is still not captured, press HOME twice
to exit programming and review the "Learning
Precautions"on the previous page. If needed, also see
"Troubleshooting"on page 31. After review, start
programming again at step 1.
6. To learn other functions, repeat steps 3
through 5 as desired.
7. To exit programming, press HOME twice. The
display will return to the last-selected device
menu screen.
D
A S
ELETING
INGLE
1. Press and hold SETUP until the two bottom
IR segments flash twice. The Program Keys
will appear as SETUP flashes repeatedly.
2. Press IR DEL once. The IR Delete
programming screen will appear:
3. Press a device key once (i.e., AUX, CBL/SAT,
CD, TV, DVD, AUDIO, VCR, or PVR) for the mode
where the learned key to be deleted resides.
The selected device menu screen, including
HOME, will be displayed.
4. Press the learned key to be deleted twice.
Upon deletion, the two bottom IR segments
will flash twice as confirmation. The Program
Keys will appear again.
5. If desired, repeat steps 2 through 4 to delete
another learned key.
6. Exit programming by pressing HOME once.
The display will return to the last-selected
device menu screen
L
K
EARNED
EY
.
D
A
L
ELETING
LL
EARNED
S
M
PECIFIC
ODE
1. Press and hold SETUP until the two bottom
IR segments flash twice. The Program Keys
will appear as SETUP flashes repeatedly.
2. Press IR DEL once. The IR Delete
programming screen will appear:
3. Press a device key once (i.e., AUX, CBL/SAT, CD,
TV, DVD, AUDIO, VCR, or PVR) for the mode
where the learned keys to be deleted reside.
The selected device menu screen, including
HOME, will be displayed.
4. Press the same device key (as in step 3) once.
Upon deletion, the two bottom IR segments
will flash twice as confirmation. The Program
Keys will appear again.
5. If desired, repeat steps 2 through 4 to delete
other learned keys from another mode.
6. Exit programming by pressing HOME once.
The display will return to the last-selected
device menu screen
U
'
G
SER
S
UIDE
K
I
A
EYS
N
.
Using Learning 19

Publicité

Chapitres

Table des Matières
loading

Table des Matières