Display Controls; Before First Use - Unold Clara Notice D'utilisation

DISPLAY CONTROLS

BEFORE FIRST USE

Boiling water can cause scalding. Therefore, always
handle the appliance with caution when it contains
hot water.
1. Remove all packaging and transport safety devices. Keep the packaging
material away from children. Choke hazard! Dispose of the packaging
materials according to the relevant local waste disposal regulations.
2. Inspect the appliance for damage. If there is visible damage, do not operate
the appliance; instead, contact our Customer Service department.
3. Wipe off all parts with a moist cloth.
4. Check that the appliance is stable.
5. Remove the lid from the container.
6. Fill the container with 0.6 litres clear, cold water.
7. Place the lid on the container, pressing lightly. Make sure that the lid is
correctly seated.
8. Connect the power plug to the mains supply (220–240 V~, 50/60 Hz).
9. The ON/OFF button lights up red; the appliance is in stand-by mode.
Stand 17.3.2025
Copyright UNOLD AG | www.unold.de
ON/OFF button
Keep warm button
Temperature selection buttons
DE
EN
FR
NL
IT
ES
PL
19 von 68