Operation - Unold Clara Notice D'utilisation

DE
10. Press the ON/OFF button once.
11. All buttons light up, the "Keep warm" button flashes.
EN
12. Now press the "100 °C" button. The corresponding indicator lamp lights up
and the appliance heats the water.
FR
13. When the water boils, the boil stop shuts off the appliance automatically.
NL
14. For hygienic reasons, discard the water from the first boiling.
IT

OPERATION

ES
Important: Boil water only when the lid is on the
PL
container. Otherwise, boiling water can splash out of
the container, which can cause scalding!
1. Add the desired amount of clear and cold water. You need to add at least
0.3 litres of water, but no more than the maximum capacity of 0.6 litres of
water.
2. Place the lid on the container, pressing lightly. Make sure that the lid is
correctly seated.
3. Connect the power plug to the mains supply (220–240 V~, 50/60 Hz).
4. The ON/OFF button lights up red and the appliance is in standby mode.
5. Press the ON/OFF button to switch the appliance on.
6. All buttons light up and the "Keep warm" button flashes.
Boiling function
7. Select the desired water temperature by pressing the corresponding button.
The following temperatures are available, between lukewarm and a rolling
boil: 40, 50, 60, 70, 80, 90 and 100 °C. If you do not make any entries for
three minutes, the device returns to standby mode.
8. We recommend the following temperatures: 50 °C for baby food, 70 °C for
green or white teas, 90 °C for instant coffee and 100 °C for black teas.
9. The button for the selected target temperature flashes. While the water is
heating, the lower temperature levels light up consecutively, showing the
respective water temperature that has been reached.
10. You can select a higher target temperature at any time while the water is
heating by pressing the corresponding button.
20 von 68
Copyright UNOLD AG | www.unold.de
Stand 17.3.2025