Adjusting The Air Flow Direction - Sharp GS-XP07FR Notice D'utilisation

ADJUSTING THE AIR FLOW DIRECTION

VERTICAL AIR FLOW DIRECTION
HOW TO ADJUST THE AIR FLOW DIRECTION
Press the SWING button on the remote control once.
• The vertical adjustment louvre will change its angle continuously.
Press the SWING button again when the vertical adjustment louvre is at the
desired position.
• The louvre will stop moving within the range shown in the diagram.
• The adjusted position will be memorized and will be automatically set to the same position
when operated the next time.
COOL and DRY modes
Floor standing
The adjustment range is narrower the
SWING range in order to prevent con-
densation from dripping.
HORIZONTAL AIR FLOW DIRECTION
Hold the horizontal adjustment
louvre as shown in the diagram
and adjust the air flow direction.
CAUTION
Never attempt to adjust the vertical adjustment louvres manually.
• Manual adjustment of the vertical adjustment louvre can cause the unit to malfunction when the
remote control is used for adjustment.
• When the vertical adjustment louvre is positioned at the lowest position in the COOL or DRY mode
for an extended period of time, condensation may result.
Do not adjust the horizontal adjustment louvre to the extreme left or right in the COOL mode
with the fan speed set to "SOFT(
Condensation may form on the louvres.
Adjustment range
Ceiling suspended
)" for an extended period of time.
E-10
HEAT mode
Floor standing
The range is wide so the air flow can be
directed toward the floor.
Floor standing
Ceiling suspended
Ceiling suspended