GEBUWIN WW2000 /D/Ex Série Mode D'emploi page 14

The marks have following meaning:
1 >> CE marking in accordance with the European Machinery Directive
2 >> Ex marking for explosion protection
3 >> Group II for use in all environments except mining
4 >> Product falls into category 3, for use in zone 2 and 22. The winches have under normal use no ignition source.
5 >> Can be used in environments with a gas (G) and / or dust (D) atmosphere
6 >> Tx is the temperature rating. Tx is the maximum surface temperature which may occur and depends on the
ambient temperature.
For these winches T4 is valid. That is to say that the maximum absolute surface temperature may mount to
135 ° C. Temperature measurements have shown that the absolute surface temperature mounts to 80 º C at an
ambient temperature of 20 º C.
The maximum surface temperature rises and falls proportionally with the ambient temperature.
4. Maintenance
The winch must be unloaded for inspection and maintenance tasks.
Inspection and maintenance tasks must be performed by skilled personnel, e.g. via your Gebuwin
dealer.
Inspection/ Maintenance
interval
Before each use
Per quarter
Annually
* Texaco "Texclad premium 2" is recommended by us for the worm - worm wheel gearing (or equivalent).
Orders can be placed through your Gebuwin dealer.
Tasks
visually check cable and loading hook
-
check amount of grease* on the worm wheel gearing
-
check the brake function
-
visually check cable and loading hook for any fracture
-
grease the worm - worm wheel gearing
-
check the load pressure brake for wear and tear
-
Replace the brake discs as needed
Be careful: Do not get any grease on the brake discs or preceding
surfaces
- check the cable according to DIN 15020 pg. 2 for wear and tear; also
test and maintain the minimum breaking force.
check the tightness of the mounting bolts
-
check all the winch parts for wear and tear; replace where necessary;
-
grease where needed.
check the type identity sticker for clarity
-
13