Error Messages - KERN and SOHN SFB 10K1HIP Mode D'emploi

9.4 Error messages

Error
message
- - - - -
Maximum load exceeded
- - ol - -
Err 1 Incorrect data input
Err 2 Incorrect time entry
Err 4 Zeroing range exceeded due
to switching-on balance or
pressing
max)
Err 5 Keyboard error
Err 6 Value outside the A/D
changer range
Err 9 Stability display does not
appear
Err 10 Communication error
Err 15 Gravitation error
Err 17 Taring range exceeded
Fai l h /
Adjustment error
Fai l l
Err P Printer error
Ba lo /
Battery very low
Lo ba
Should other error messages occur, switch balance off and then on again. If the error
message remains inform manufacturer.
SFB-BA-e-1625
Description
(normally 4%
Possible causes
• Unload weighing system or reduce
preload.
• Follow format "yy:mm:dd"
• Follow format "hh:mm:ss"
• Object on the weighing plate
• Overload when zeroing
• Weighing plate not installed
• Damaged weighing cell
• Damaged electronics
• Check the environmental
conditions.
• No data
• Range 0.9 ~ 1.0
• Reduce load
• Repeat adjustment.
• Check communication parameters
• Recharge battery
49