Starting And Stopping - Husqvarna WB48S Manuel D'utilisation

Starting and stopping

WARNING! Note the following before
!
starting:
Do not start a lawn mower unless the
cutter and all covers are fitted correctly.
Otherwise the cutter could come loose
and cause personal injuries.
Always move the machine away from the
refuelling area and source before
starting.
Place the machine on a flat surface.
Ensure the cutting attachment cannot
come into contact with any object.
Keep people and animals well away from
the working area.
Ensure the ignition lead sits correctly on the spark plug.
Starting: Open the fuel tap.
Starting
Pull the engine brake handle against the upper handlebar
with your left hand.
Grip the starter handle, slowly pull out the cord with your
right hand until you feel some resistance (the starter
pawls grip), now quickly and powerfully pull the cord.
Never twist the starter cord around your hand.
CAUTION! Do not pull the starter cord all the way out and
do not let go of the starter handle when the cord is fully
extended. This can damage the machine.
Drive
To engage the drive, push the clutch lever forwards.
STARTING AND STOPPING
Stopping
• Stop the engine by releasing the engine brake handle.
The drive is also disengaged when you release the
brake handle. By releasing the brake lever a bit only
the drive will be disengaged.
• Close the fuel tap.
–
English 13