Error Codes - Summit Ffbf151W Mode D'emploi

8 ERROR CODES

Errors
Your fridge will warn you if the temperatures for the cooler and freezer are at improper
levels or if a problem occurs with the appliance. Warning codes are displayed in the freezer
and cooler indicators.
ERROR TYPE
E01
E02
E03
E06
E07
E09
E10
MEANING
Sensor warning
Sensor warning
Sensor warning
Sensor warning
Sensor warning
Freezer compartment
is not cold enough
Fridge compartment is
not cold enough
WHY
Likely to occur after long
term power failure.
Likely to occur after:
- Long term power failure.
- Hot food has been left in
the fridge.
EN - 28
WHAT TO DO
Call Service for assistance as
soon as possible.
Call Service for assistance as
soon as possible.
Call Service for assistance as
soon as possible.
Call Service for assistance as
soon as possible.
Call Service for assistance as
soon as possible.
1. Set the freezer temperature
to a colder value or set Super
Freeze. This should remove
the error code once the
required temperature has been
reached. Keep doors closed
to improve time taken to reach
the correct temperature.
2. Remove any products which
have thawed/defrosted during
this error. They can be used
within a short period of time.
3. Do not add any fresh produce
to the freezer compartment
until the correct temperature
has been reached and the
error is no longer.
If this warning continues an
authorised technician needs to be
contacted.
1. Set the fridge temperature to
a colder value or set Super
Cool. This should remove the
error code once the required
temperature has been reached.
Keep doors closed to improve
time taken to reach the correct
temperature.
2. Please empty the location
at the front area of air duct
channel holes and avoid
putting food close to the
sensor.
If this warning continues an
authorised technician needs to be
contacted.