Product Information; Applications; Design Features; Available Versions And Accessories - Sartorius Stedim Biotech CERTOMAT S-II Mode D'emploi

1

Product Information

1.1

Applications

The CERTOMAT ® S-II is a powerful and robust orbital
benchtop shaker for the universal use in the various
tasks of biological and chemical laboratories. Its
compact design and its construction features allow its
placement in incubators, conditioning cabinets or in
shelves of a rack, for instance.
1.2

Design Features

•
Counter weight for mass balancing of the load applied;
for compensation (minimization) of vibrations, which
can be transmitted to the shaker unit and working
place, i.e. due to resonance effects.
•
Shaking amplitudes of 25 mm and 50 mm;
delivery setting of shaking amplitude can be changed
to the alternate setting in-place at customers site by
authorized service, if necessary.
•
Especially designed mounting of the tray support for
tension-free operation;
providing precisely reproducible rotation at minimum
vibrations even at heavy loads and changing conditions
at the working place, such as varying temperatures.
•
New, simple and reliable tray locking „Quick Snap" for
easy handling of the loaded trays.
•
Motor of external rotor type with brushless drive:
connected to the shaking table via a robust poly-V belt,
providing noiseless and long-term, maintenance free
operation.
4
1.3

Available Versions and Accessories

The CERTOMAT ® S-II can be applied with the following
trays and their possible equipment:
•
Trays: type E/EU (420 x 420 mm)
2 trays of type E/EU can be mounted two-
storied
type F/FU (800 x 420 mm)
• If CERTOMAT ® - type shakers already exist in your
laboratory, which are equipped with trays of size E/EU or
F/FU, respectively, you can also use them with the
CERTOMAT ® S-II as well
Above this the CERTOMAT ® S-II can be applied as an
incubation shaker together with incubation hoods
CERTOMAT ® H or HK
•
Trays can be delivered being finally equipped with sets of
clamps for Erlenmeyer flasks of different size, or without
assemblies. Above this clamps of different size can be
delivered extra and individually combined. Other
mountings, such as test tube racks or universal mounting
sets are also available. These universal mountings allow
the assembly of various vessels (beakers, bottles, or
separation funnels, for instance) to the CERTOMAT ® S-II.
Further information you will find in the separate
documentation "Accessories for CERTOMAT® shaker".
1) Trays of modified design for „Quick Snap" locking
required; for rebuilding of existing trays please
contact Sartorius AG International´s customer service.
2) Incubation hoods of modified design for the use of
the CERTOMAT ® S-II required; for rebuilding of
existing incubation hoods please contact Sartorius AG
International´s customer service.
1)
.
1)
.
1)
.
2)
and a tray of size E/EU.