Disposal; What If There Are Problems; Technical Data - Beurer HD 100 Mode D'emploi

7. Disposal

Please dispose of the electric overblanket in accordance with Directive 2002/96/EC – WEEE (Waste
Electrical and Electronic Equipment). If you have any questions, please contact the local authorities
responsible for waste disposal.

8. What if there are problems?

Problem
The indicator lamp is not illuminated while
- the controller is properly connected to the electric
overblanket
– the mains plug is connected to a working socket
- the sliding switch for ON/OFF and temperature settings
is set to 1, 2, 3, 4, 5 or 6

9. technical data

See the type plate label on the electric overblanket.
cause
The safety system has
switched the electric
overblanket off perma-
nently.
14
solution
Send the electric
overblanket and
the controller for
servicing.