EINHELL TE-COL 18/27 Li Instructions D'origine page 18

•
Leaving the lid open for prolonged periods
can lead the temperature inside the box to
rise considerably.
•
Let warm food and drinks cool down before
placing them in the cool box to keep them
cool.
•
After a long period in operation, the cooling
capacity can usually be reduced.
7. Replacing the power cable
Danger!
If the power cable for this device becomes da-
maged, it must be replaced in order to prevent
hazards.
8. Cleaning, maintenance and
ordering spare parts
Danger!
Always disconnect the power cable from the
socket outlet, the 12-V cable from the plug and
remove the battery before starting any cleaning
work.
8.1 Cleaning
•
Clean the inside of the cool box with washing
up liquid and clean water. Dry the inside of the
cool box thoroughly.
8.2 Replacing the fuse in the 12-V plug (Fig. 9)
Replace the fuse (T 6.3A) inside the 12-V power
plug if it becomes defective. Unscrew and remove
the top end of the plug and replace the defective
fuse with one of the same type. Screw the top end
of the plug back in place.
8.3 Maintenance
There are no parts inside the equipment which
require additional maintenance.
8.4 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
For our latest prices and information please go to
www.Einhell-Service.com
Anl_TE_COL_18_27_Li_SPK13.indb 18 Anl_TE_COL_18_27_Li_SPK13.indb 18
GB
Spare parts are available for this device for at
least 10 years after the production date.
9. Disposal and recycling
The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should be
taken to a suitable collection center for proper dis-
posal. If you do not know the whereabouts of such
a collection point, you should ask in your local
council offi ces.
10. Storage
Empty the cool box and remove the power cable,
12-V power cable and battery. Store the power
cables in the front pocket. Clean and dry the de-
vice as described above, and leave the lid open to
prevent mold from growing. Use the carry-handle
as a brace to keep the lid open.
Take out the battery/batteries. Store the device
and its accessories out of the reach of children
in a dark and dry place at above freezing tempe-
rature. The ideal storage temperature is between
5 and 30 °C. Store the electric tool in its original
packaging. Remove the battery from the device if
stored for a prolonged period.
11. Faults
The cool box does not work
A) Mains power supply (220-240 V ~ 50 Hz)
Check whether the plug is properly inserted in the
socket outlet and that the socket outlet is ener-
gized.
B) 12-V power supply
•
Check whether the 12-V power plug is pro-
perly inserted in the 12-V socket and that the
12-V socket is energized.
•
Check whether the fuse in the 12-V power
plug is defective. Refer to Chapter "8.2 Re-
placing the fuse in the 12-V plug" to change
the fuse.
- 18 -
03.12.2024 11:28:27 03.12.2024 11:28:27