Connecting The Ac Power Cord; Connecting A Personal Computer - Sony MDS-PC2 Mode D'emploi

Hooking Up the Audio Components
Connecting audio conponents to CONTROL
A1 jacks
Monaural (2P) mini-plug cords (not supplied)
For information on connections through the CONTROL
A1 jacks, see page 39.

Connecting the AC power cord

Connect the AC power cord of the deck to a wall outlet.
Note
Do not connect the AC power cord to a switched outlet.

Connecting a personal computer

Connect the MD deck to a personal computer using a
monaural mini-plug cord (2-pin) (supplied) and a
connector (supplied).
By this connection, you can edit MDs on computer's
display or input disc names and track names using
computer's keyboard. For connection and operation, refer
to the operating instructions supplied with the MD editor
2 software for details.
Notes on setting up
• Don't place your personal computer on top of this
MD deck.
• Don't install the deck vertically (sideways).
6 GB