Hooking Up The Audio Components - Sony MDS-PC2 Mode D'emploi

Hooking Up the Audio Components

Required cords
Audio connecting cords (2) (supplied)
When connecting an audio connecting cord, be sure to match the
color-coded pins to the appropriate jacks: white (left) to white
and red (right) to red.
White (L)
Red (R)
Optical cable (2) (only one supplied)
• When connecting an optical cable, take the caps off the
connectors and insert the cable plugs straight in until they click
into place.
• Do not bend or tie the optical cable.
LINE (ANALOG) DIGITAL
IN OUT (OPTICAL)
IN1 IN2
L
R
(VARIABLE)
MD DIGITAL
(OPTICAL)
OUT IN
OUT
L
R
Amplifier, etc. Digital amplifier, etc.
White (L)
Red (R)
AC power cord
CONTROL
A1
OUT
DIGITAL
(OPTICAL)
IN OUT
DAT deck, MD deck, CD player,
DBS tuner, etc.
Things you should keep in mind while
hooking up the system
• Turn off the power to all components before making
any connections.
• Do not connect any AC power cord until all the
connections are completed.
• Be sure the connections are firm to prevent hum and
noise.
Jacks (connectors) for connecting audio
components
Connect
Amplifiers
Digital amplifiers
DAT decks, another MD deck,
CD players, or DBS tuners
To the
LINE (ANALOG) IN/OUT jacks
DIGITAL (OPTICAL) IN2/OUT
connectors
DIGITAL (OPTICAL) IN1
connector
5 GB