Optical Mode; Operation; Setup Menu - Sonoro PRESTIGE SO-330 Mode D'emploi

15. Optical mode

15.1

Operation

Your external player (e.g. audio amplifier) must be connected to the optical
input jack of PRESTIGE with an audio cable (with optical connector, not
supplied).
To access the
Optical mode,
To start and control
playback,
To mute or restore
the sound output,
15.2

Setup menu

Press SETUP in the optical input mode to access the setup menu (see chapter
"Using the menus"). The following options are available and the current settings (if
applicable) are marked with an asterisk (*).
•
[Bluetooth headphone]
To connect or disconnect with a Bluetooth headphone, see chapter "Basic
operation".
•
[System Settings]
See chapter "System Settings".
•
[Main menu]
To access other playback modes, alarm or sleep timer.
The optical input is only supporting for the linear PCM, 2 channels 16 bit or
24bit music source.
© sonoro audio GmbH 2021
Press key on the remote control.
Or, press MENU once, then
rotate the navigation knob) to select the Optical
mode and then press OK to confirm.
Perform all playback operations on the
external player.
Press or button.
or (or
97
GB