Using The Antennas - Sonoro PRESTIGE SO-330 Mode D'emploi

3.3

Using the antennas

1. Screw the rod antenna located on the back of PRESTIGE to the FM/DAB
antenna connector.
2. If you are using the rod antenna, pull the rods of the antenna apart and
align the antenna so that you have the best possible reception.
For even better reception, connect PRESTIGE to a suitable house
antenna.
3. Screw the desired Wi-Fi antenna located on the back of PRESTIGE to the
WiFi antenna connector. Lift Wi-Fi antenna upwards.
4. If you want to connect PRESTIGE to your network using an Ethernet cable,
connect an Ethernet cable from LAN port on the back of PRESTIGE to your
router.
5. Plug-in the AC power cord.
© sonoro audio GmbH 2021
GB
73