DK2 POWER OPV425 Mode D'emploi page 20

OPERATION
STOPPING THE ENGINE
STOPPING THE ENGINE
CAUTION:
allow the engine to run idle for a few minutes. This is necessary to prevent the
moisture of the outside air from getting into the engine carburetor.
• Slow the engine to idle by turning the accelerator lever fully counter-clockwise.
• Shift the engine ON/OFF switch to the OFF position.
• Close the fuel valve.
See the engine's owner's manual for further information about your engine.
20 | OPV425 man.
Never stop the engine abruptly from full speed. Slow the speed and