Program Definition - Sartorius Stedim Biotech CERTOMAT IS Mode D'emploi

3.3.4.1 Program definition

•
After pressing of the [ENTER] key (alternately press the flashing function key for approx. 2 sec.) you change to the program
definitions "PRSTEP . .STEP1 . .STEP4"
•
In this menu the different "STEPS" can be selected within the program "PROG1.....PROG4".
•
At programs protected by passwords the respective password must be input for the editing/modification of present programs.
flashes
*
PROG1 PROG2
ENTER programmed
START starts
PROG4 PROG5
Fig. 12: PROG1-4: program menu
•
In fig. 13 (program definition) is indicated, whether the PRSTEP is "ON" or "OFF". Furthermore the step duration is indicated.
Selection of the different "STEPS" (fig. 13):
F1
•
After pressing of [F1] the set-ups for "PRSTEP" can be effected.
F2
•
After pressing of [F2] the set-ups for "STEP1" can be effected.
F3
•
After pressing of [F3] the set-ups for "STEP2" can be effected.
F4
•
After pressing of [F4] the set-ups for "STEP3" can be effected.
F5
•
After pressing of [F5] the set-ups for "STEP4" can be effected.
MODE
•
The respective "active" PROG is indicated, here "PROG1".
16
*
alternately press the
flashing function key
for approx 2 sec.
PROG3 <
PROG1
for:
for:
for:
for:
for:
MODE:
ENTER >
PRSTEP
ESC
ON
0:00
STEP3
Fig. 13: program definition
PRSTEP
STEP1
STEP2
STEP3
STEP4
Display field
STEP1 STEP2
0:00 0:00
0:00
STEP4 PROG1