Sartorius Stedim Biotech CERTOMAT IS Mode D'emploi page 64

Table des Matières

Publicité

Introductionary Note
This Operating Manual describes the CERTOMAT ® IS at
the time this document was printed (see rev.-no. in the
bottom line). Sartorius Stedim Biotech GmbH reserves
the right to modify the equipment of its products as
well as the order information without notice.
The information given in this document has been
carefully estimated. However, this document is not
necessarily complete. Due to the continuous
development of the unit it may be possible that you
find information which does not apply to your device.
If you find missing or wrong information or if you need
more detailed information concerning any of the
features of the unit please send us a note.
The CERTOMAT ® IS is just an example of laboratory
equipment products from the Sartorius Stedim Biotech
GmbH.
Our range of equipment includes shakers and incubator
shakers, centrifuges, ultrapure water systems, air
samplers and fermenters/bioreactors.
You will find further information on our homepage
www.sartorius-stedim.com
If you are interested in more information about the
complete product program or about specific equipment,
please contact us.
Sartorius Stedim Biotech GmbH
Weender Landstraße 94 - 108
37075 Goettingen, Germany
Telephone +49.551.308.3118
Telefax +49.551.308.3918
info@sartorius-stedim.com
www.sartorius-stedim.com
EG-Declaration of Conformity
With the declaration of conformity, which is attached
or which accompanies the equipment, Sartorius Stedim
Biotech GmbH confirms the conformance of the
CERTOMAT ® IS with the specified guidelines.
2
General Safety Notes
Laboratory seniors or the persons responsible for the use
of the equipment must inform the personnel about the
dangers at the operation of the CERTOMAT ® IS.
Furthermore they have to guarantee that the relevant
safety notes are observed. The personnel must have the
necessary qualification for the operation of the
equipment and its handling.
Please take special care regarding the operating
information. Improper use of the unit is thus avoided
and you have full claim for guarantee. Please contact us
if you have questions.
Important safety notes in this manual are marked with
this symbol. Such instructions apply additionally to the
other safety instructions for the field of application and
at the working place.
Do not use devices with the wrong potential version.
Disregard of the safety instructions may for example
result in damages at the equipment or can cause other
material and eventually also person damages.

Publicité

Table des Matières
loading

Table des Matières