ECOFOREST ECO I Manuel D'installation Et Maintenance page 38

It is highly recommended to place a grid in the intake pipe to allow the free air circulation and avoid the
entrance of unwanted objects or little animals like birds.
KEYBOARD ASSEMBLY, POWER CABLE, ROOM SENSOR AND WIFI ANTENNA CONNECTION.
An Ecoforest box is placed inside the fireplace. It contains the user manual, the installation and maintenance
manual, a keyboard and keyboard support (not for insert stoves), a Wi-Fi antenna, a power cable, a room sensor and
a cleaning brush.
The room sensor and the power wire are connected at the rear of the stoveand in the right side.
q
Screws for keyboard support.
w
Support with mounted keyboard.
e
Keyboard's connection band and C.P.U.
r
Back side of keyboard.
t
Room sensor connection.
y
Power connection ~230/240V - 50Hz.
u
Room sensor.
e
Keyboard's connection band and C.P.U.
r
Back side of keyboard.
t
Room sensor connection.
y
Power connection ~230/240V - 50Hz.
u
Room sensor.
Screw the Wi-Fi antenna to the docking station. This magnet base must be stuck to the back of the boiler.
Once assembled, the unit has to remain in a vertical position.
q
Antenna.
w
Magnet connection base.
Place the magnet connection base with the antenna where appropriate. When possible, avoid the presence
of metal sheets around the antenna as the WiFi signal might be distorted.
37
Drawing 15
Drawing 16
Drawing 17