ECOFOREST ECO I Manuel D'installation Et Maintenance page 32

4.13. Security distances should be respected when the stove is installed in spaces where materials around it, be it
the construction material itself, the fuel or any other type of materials, are likely to be flammable. Granting a
better access to the stove for future maintenance or repair work is also worth considering.
A Lateral wall.
Back of the
B separation that allows visualizing the
label marking the stove.
C 1.5 x depth of stove.
D Shelf.
E Depth of stove.
The measurement of the lateral ventilation openings indicates the effective area of air passage through
them. If a decorative grid is placed, the effective area of air passage of the said grid must coincide with the effective
area of passage of the openings, varying the dimensions (height and / or width) of the grids to achieve the right air
passage area.
Figure 7 shows the minimum permitted dimensions of the built-in space (non-flammable material) with
respect to the stove and the position of the ventilation grids, for the installation of the Córdoba, Córdoba ducted,
Teide and Granada models.
Ecoforest only guarantees the correct operation of the stove if the dimensions and the position of the
ventilation grids are respected.
If the installation does not allow to respect the location of the ventilation grids, the standard measures of
built-in installations must be taken into account (figure 8), in order to avoid excess temperature on electronic
stove. Minimum
≥ 80 mm
See dimensions
≥ 500 mm
See dimensions
INSTALLATION OF BUILT-IN STOVES
Effective grid
q
OBLIGATORY.
w
Effective grid area right. OBLIGATORY.
Isolated output gas pipe within the
e
socket. OBLIGATORY.
e
B
C
w
C
≥ E
area left side.
≥ 200x120mm
≥ 200x120mm
B-B SECTION
B
50 50
Drawing 4
31
Drawing 3
Ø80mm
C-C SECTION
50
50