Machine Description; General Information - Husqvarna HTC D60 Manuel De L'opérateur

HTC D60

3. Machine description

3.1 General information

The machine is a dust extractor with an integrated pre-separator for industrial and building use
intended for the dry vacuuming of dust particles, e.g. concrete, wood, stone etc. The dust extractor
is equipped with a pre-separator, where the majority of the dust is collected instead of being sucked
into the actual vacuum cleaner, as well as a two-stage filter system, a coarse filter followed by a fine
filter.
It is also equipped with a filter cleaning system that unloads the vacuum cleaner's filter increasing the
service life and maintaining the performance of the dust extractor.
To handle the collected dust, a bag system is used on the pre-separator and dust extractor. To pre-
vent bags from being sucked into the pre-separator or dust extractor, they are equipped with a rubber
valve that closes during operation.
The pre-separator can be raised and lowered with a simple movement and easily removed from the
chassis if necessary.
The dust extractor can also be controlled from HTC DURATIQ grinder.
9
V 1.0