Weekly Maintenance - Husqvarna HTC D60 Manuel De L'opérateur

HTC D60

7.4 Weekly maintenance

Check for leaks
• Place your hand over the inlet and make sure it goes up to 370mbar.
Check pre-separator
• Inspect sealing strips and surfaces for cracks or damage.
• Check for unusual dust build up.
• Also check for cracks or other irregularities.
• Adjust the quick fasteners on the pre-separator if necessary.
Check bypass valve
• Check the butterfly damper can move without jamming.
• Visually check that there is no damage on the butterfly damper's seal
surfaces.
Check filter cleaning valve
• Perform a normal cleaning cycle and check that the pulse valve is working
distinctly and does not leak in the closed position.
Check side duct fan
• If necessary, vacuum up any dust on visible parts of the side duct fan.
Dust around the fan can cause overheating.
• Also listen for noise from the
side duct fan.
23
V 1.0