Service; Repairs; Spare Parts; Motor Protection - Husqvarna HTC D60 Manuel De L'opérateur

8. Service

8.1 Repairs

Any repairs that may be required must be carried out by a HTC Service Centre that has trained ser-
vice personnel and uses HTC original parts and accessories. Contact your retailer if your machine
requires servicing. For contact information, see Contact Information at the start of the manual.

8.2 Spare parts

To ensure rapid delivery of spare parts, always specify the model, the machine's serial number and
the spare part number when ordering. Information on the model and serial number can be found on
the machine's name plate.
Information on spare part numbers can be found in the machine's spare parts list which is available to
read or print out from the accompanying digital media or HTC's website: www.htc-floorsystems.com.
Only original tools and spare parts from HTC may be used. Otherwise, neither the CE marking nor the
warranty will be valid.

8.3 Motor protection

Automatic reset of motor protection
See warning message on the screen, when it disappears, the motor protection has been reset.
• The motor protection trips when the motor draws too much current or if
the motor protection gets hot.
• Check whether the suction system is blocked (negative pressure is dis-
played on the screen).
• Disconnect the machine from the mains power supply.
• Clean the motor/control cabinet (wait a while before opening the control
cabinet).
• Close the control cabinet, connect the machine to the mains power sup-
ply and start the machine.
V 1.0
HTC D60
26