EINHELL GC-EM 1232 Instructions D'origine page 17

•
Original operating instructions
•
Safety instructions
3. Proper use
The lawn mower is intended for private use, i.e.
for use in home and gardening environments.
Private use of the lawn mower refers an annual
operating time generally not exceeding that of
50 hours, during which time the equipment is
primarily used to maintain small-scale, residential
lawns and home/hobby gardens. Public facilities,
sporting halls, and agricultural/forestry applica-
tions are excluded.
Important! Due to the high risk of bodily injury to
the user, the lawn mower may not be used to trim
bushes, hedges or shrubs, to cut scaling vege-
tation, planted roofs, or balcony-grown grass, to
clean (suck up) dirt and debris off walkways, or
to chop up tree or hedge clippings. Moreover, the
lawn mower may not be used as a power cultiva-
tor to level out high areas such as molehills.
For safety reasons, the lawn mower may not be
used as a drive unit for other work tools or toolkits
of any kind, unless they have been expressly per-
mitted by the manufacturer.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Anl_GC_EM_1232_SPK13.indb 17 Anl_GC_EM_1232_SPK13.indb 17
GB
4. Technical data
Mains voltage: .........................220-240 V ~ 50Hz
Power consumption: ................................ 1200 W
Motor speed: .......................................3500 min
Cutting width: .............................................32 cm
Cutting height adjustment: .....20-60 mm; 3 levels
Grass basket capacity: ............................ 30 liters
L sound pressure level: ....................... 86 dB(A)
pA
K uncertainty: ....................................... 3 dB(A)
pA
L sound power level measured: ....... 93.2 dB(A)
WA
K uncertainty: .................................. 2.18 dB(A)
WA
L sound power level guaranteed: ....... 96 dB(A)
WA
Vibration at the handlebars a
Protection class: ............................................ II/
Weight: .......................................................9.1 kg
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 62841.
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 62841.
The stated vibration emission levels and stated
noise emission values were measured in ac-
cordance with a set of standardized criteria and
can be used to compare one power tool with
another.
The stated vibration emission levels and stated
noise emission values can also be used to make
an initial assessment of exposure.
Warning:
The vibration and noise emission levels may vary
from the level specifi ed during actual use, depen-
ding on the way in which the power tool is used,
especially the type of workpiece it is used for.
Limit the operating time!
All stages of the operating cycle must be conside-
red (for example, times in which the electric tools
are switched off and times in which the tool is
switched on but operates without load).
- 17 -
-1
: .............< 2.5 m/s
2
h
30.10.2024 13:48:04 30.10.2024 13:48:04