VOLTCRAFT VC2030A Notice D'emploi page 25

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Dear Customer,
this safety information serves not only to protect the product, but also your own
safety and the safety of other persons. Therefore, read this chapter very carefully
before taking the product into operation!
This product left the manufacturer's factory in a safe and perfect condition. To
maintain this condition and to ensure safe operation, the user must observe the
safety information and warning notes in these operating instructions.
• Unauthorized conversion and/or modification of the product are not permissible
for safety and approval reasons.
• The product is only suitable for operation in dry environments. The entire product
must not become damp or wet. Never touch it with wet hands to avoid damage to
it.
• This product is not a toy and not suitable for children!
• Do not leave packaging material unattended. It may become a dangerous toy for
children.
• The voltage between the connection points must not exceed the indicated
voltage.
• Be especially careful when dealing with voltages >25 V/AC or >35 V/DC! Even
at these voltages it is possible to receive a potentially fatal electric shock if you
touch electrical conductors.
• Never touch the measuring prods during measurement!
• Set the meter to the desired unit before any measurement. Incorrect measure-
ments may destroy the product!
• Always observe proper polarity when connecting the measuring lines to the
meter. (Red = Plus pole, Black = Minus pole).
• Check before each measurement that the meter or measuring lines are not
damaged. Never perform any measurements if the insulation or the product are
damaged otherwise!
• During each measurement, observe that the connections/measuring points do
not touch. Danger of short-circuit!
25

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

1009621

Table des Matières