Publicité
D I G I T A L
D O O R
E N T R Y
S Y S T E M S
BASIC INSTALLATION
SINGLE-WIRED DIAGRAM
SECTION TABLE
Up to 100 m -
Up to 25 m -
Operation -
Configure the panel as the main entrance panel (J1 jumper installed), see step 6 on page 13.
SYSTEM ON STANDBY
The telephones are inactive (the functions of door opening and communication with the entrance panel are disabled). A continuous
tone will be heard if the handset is picked up.
SYSTEM ACTIVATED. MAKING A CALL
Only the telephone associated to the push-button will receive the call. Confirmation of the call on the entrance panel. If the handset of
another telephone is picked up, you will hear beeping tones. If the handset of the telephone called is off the hook or there is no telephone
programmed with that push-button, intermittent tones will be heard at the entrance panel.
Time setting to answer: 30 seconds.
Maximum time setting for conversation: 60 seconds. Extension of time for conversation: + 60 seconds.
Publicité
