Basic Installation - Alcad GRF-400 Manuel D'utilisation

D I G I T A L D O O R E N T R Y S Y S T E M S

BASIC INSTALLATION

- SINGLE-WIRED DIAGRAM -
1 DWELLING KIT 2 DWELLINGS KIT
SECTION TABLE
Up to 100 m -
Up to 25 m -
Operation -
MAKING A CALL. SYSTEM ACTIVATED.
The telephone associated to the pushbutton receives the call, emitting an alert signal. You are allowed a certain period of time to answer.
Once this period has expired, the system reverts to being on standby. When the receiver of the telephone is picked up, communication
will be established with the entrance panel, thereby starting the time allowed for communication. During this period of time, you can
open the door from the telephone. If this feature is enabled, you will be able to hear the door-opening tone (J2 jumper in place). You
can also extend the conversation time (see page 4). In this case, and if the receiver of the other dwelling is picked up, you will hear
beeping tones. When the time allowed for conversation expires, or when the user hangs up the receiver, the system reverts to being
on standby.
Note: You will find the time-settings of the system on page 3.