Télécharger Imprimer la page

Basic Installation - Alcad GRF-208 Mode D'emploi

Systems de videoportier avec boutons poussoirs
Masquer les pouces Voir aussi pour GRF-208:

Publicité

D I G I TA L V I D E O D O O R E N T R Y S Y S T E M S

BASIC INSTALLATION

SINGLE-WIRED DIAGRAM
SECTION TABLE
Up to 100 m -
W
Up to 25 m -
Operation -
Configure the panel as the main entrance panel (Leave the J1 jumper in place), see step 6 on page 15.
SYSTEM ON STANDBY
The monitors/telephones are inactive (the functions of door opening and of communication with the entrance panel are disabled). A
continuous tone will be heard if the handset is picked up. It is possible to activate the monitor's automatic switch-on system
SYSTEM ACTIVATED. MAKING A CALL
Only the monitors/telephones associated to the push-button will receive the call. Confirmation of the call on the entrance panel. If the
receiver of another monitor/telephone is picked up, you will hear beeping tones. If the handset of the monitor/telephone called is off
the hook or there is no monitor/telephone programmed with that push-button, intermittent tones will be heard at the entrance panel.
Time setting to answer: 30 seconds.
Maximum time setting for conversation: 60 seconds. Extension of time for conversation: + 60 seconds.

Publicité

loading

Ce manuel est également adapté pour:

Tcb-011Tcb-021Col-000