Panasonic AW-RP50E Mode D'emploi page 21

Network settings
Setting the port number
Set the port number for the remote camera.
On the [SYSTEM] menu, select [CAM PORT] and
display [PORT:CAM1] to [PORT:CAM100], and then
operate the F2 dial to set the port number.
1.PORT:CAM1
Setting the MAC address
On the [SYSTEM] menu, select the [NETWORK]
menu, and display [MAC ADDRESS].
4.MAC ADDRESS
All manuals and user guides at all-guides.com
▼
80
▲
20 (E)