identités 874001.R Notice D'utilisation page 8

During use, lock the brakes for all actions.
All wheels must always be in contact with the ground.
When the product is in a stationary position, the brakes must be locked. Do not attempt to move the product if the brakes are
locked.
Make sure that the footrests are properly engaged.
Make sure the removal pin is securely engaged in the rear wheels and frame of the chair.
Be careful when climbing pavements or walking on sloping, uneven or slippery surfaces. Failure to do so may result in a significant
risk of falling or injury.
Do not use the product on a wet, icy or snowy slope.
Beware of the risk of pinching when folding and unfolding.
If any parts are damaged, broken, worn, or missing, contact the dealer.
MOUNTING & USE
1. UNFOLD THE WHEELCHAIR
Hold the handles with both hands to separate the frame slightly. Push both sides of the seat
upholstery flatness slightly by hand, so that the wheelchair has been unfolded. (Figure 1)
2. FOLDING THE WHEELCHAIR
3. USE OF BRAKE
The user holds the brake handles with both hands when the wheelchair stops, and then
moves the brake handles forward to selflocking condition, to make the rear wheels stop
completely to keep still. The process for braking is completed (Fiture 3).
4 . USE OF ARMREST
Version Octobre 2024
First turn over both the footplates, lift up both sides of
the seat upholstery lightly with hands, and then it can
be folded. (Figure 2)
When detaching the armrest, first press the armrest fastener with one hand to separate
it from the front bracket of seat tube, then you can flip it back. When assembling the
armrest, make the armrest
fastener aim at the position of the front bracket of the seat tube and press lightly to
self-locking fastener. (Figure 4)
8