Lock Button; Auxiliary Mode; Tips On Saving Energy - Sharp AY-X36RU Mode D'emploi

LOCK BUTTON

1
Press " " and "
simultaneously.
• " " will be displayed on the remote control.
• When you press any button, " " blinks 3
times.
MODE
SWING
SLEEP
TO UNLOCK
Press " " and "
simultaneously again.
• " " will disappear on the remote control.

AUXILIARY MODE

Use this mode when the remote control is not
available
TO TURN ON
Press the AUTO(AUX) button.
• The OPERATION lamp ( ) will become green
and the unit will start operating in the AUTO
mode.
• The fan speed and temperature setting are set
to AUTO.
TO TURN OFF
Press the AUTO(AUX) button again.
• The OPERATION lamp ( ) will become red.
AYX36RU_OM_3_lang.indb 12
" buttons
ON/OFF
FAN
TURBO
1
TEMP
" buttons
AUTO
(AUX)

TIPS ON SAVING ENERGY

Below are some simple ways to save energy
when you use your air conditioner.
Set the proper temperature
• Setting too higher or lower than necessary
temperature point will result in increased power
consumption.
Block direct sunlight and prevent drafts
• Blocking direct sunlight during cooling operation
will reduce power consumption.
• Close the windows and doors during cooling and
heating operations.
Keep filter clean to ensure the most efficient
operation
Turn off the circuit breaker when the unit is
not used for an extended period of time
• The indoor unit still consumes a small amount of
power when it is not operating.
EN-12
2014-09-10 19:58:16