JMA NOMAD BIT GO Manuel D'utilisation page 6

JMA NOMAD BIT GO
JMA
NOMAD BIT
2. SAFETY MEASURES
2.1 REGULATIONS
The NOMAD BIT GO key cutting machine and its safety
devices are compliant with Directive 2006/42 EC on Machi-
nery.
This manual cites all the safety regulations that the user
must respect when installing and operating the machine.
Failure to follow these instructions may compromise the
safety conditions provided for during design and testing.
When used for the purpose for which they have been desig-
ned, all machines bearing the CE mark are compliant with
EU Directive 2006/42 EC on Machinery.
1. The machine operator must know and
follow the instructions provided in this
manual.
2.2 SAFETY DEVICES
The NOMAD BIT GO key cutting machine is fitted with safe-
ty and other protective devices that define the user opera-
tion area in order to guarantee their safety.
2.2.1 User protection
- Safety screen that protects against possible
accidental activation of the master switch.
- Anti-swarf screen. The operator must still wear safety gog-
gles even though this device is present.
2.2.2 Personal protection equipment
When operating or maintaining the NOMAD BIT GO ma-
chine, users must wear the following personal protective
equipment:
- CLOTHING: Those responsible for maintaining and ope-
rating any key cutting machine should wear protective clo-
thing that meets all the basic safety requirements currently
in effect. On wet floors, users should wear safety shoes with
KEY CUTTING MACHINE
MÁQUINA DUPLICADORA
a non-slip sole.
- SAFETY GOGGLES: The operator should wear safety gog-
gles over the eyes during the duplication stages of operation.
2.2.3 Safety signs and symbols
The NOMAD BIT GO key cutting machine uses the following
safety signs and symbols:
1. Safety goggles must be worn
2. Read the instruction manual before opera-
ting the machine
3. WARNING! Hazardous operation
4. WARNING! Rotating tool
5. WARNING! Electrical voltage