JVC EXAD KD-AVX20 Manuel D'instructions page 49

Menu items
6
External Input*
Beep
Telephone Muting*
Illumination
Initialize
* 1
Selectable only for "Disc" and "USB." (Playback stops when you select one of the items.)
* 2
Depends on the amplifier gain control. (☞ page 50)
* 3
Selectable only when a DAB tuner is connected.
* 4
Not selectable when "AV Input" is selected as the source.
The REVERSE GEAR SIGNAL lead connection is required ☞ "Installation/Connection Manual." The rear view through
5
*
the camera appears on the monitor in "Full" aspect ratio (regardless of the aspect ratio setting) when you shift the
gear to the reverse (R) position.
* 6
Not selectable when the component connected to the CD changer jack is selected as the source.
* 7
The name of the component detected through the CD changer jack is shown.
The TEL MUTING lead connection is required. ☞ "Installation/Connection Manual."
* 8
Selectable settings, [reference page]
For connecting an external component to the CD changer jack on the
rear.
Changer/iPod*
External Input: Any other than the above. ☞ [42]
• For connecting the DAB tuner, this setting is not required. It is
automatically detected.
Off: Cancels.
On: Activates the key-touch tone.
8
Off: Cancels.
Muting1, Muting2: Select either one which mutes the sounds while
using the cellular phone.
You can turn off the touch pad controls and monitor lights while turning
on the unit. ☞ [5]
Normal:
Proximity/Motion: Lights up when your hand
Proxi/Motion-LCD: Light up when your hand moves close to the
Touch Pad:
Touch Pad-LCD:
Initialize all settings you have made in
reset the unit. ☞ [3]
: CD changer or iPod ☞ [35, 36]
7
Touch pad controls
Always lights.
moves close to the controls.
controls.
Lights up when your finger
touches the controls.
Light up when your finger touches the controls.
<AV
49
Monitor
Always lights.
Always lights.
Menu>. Hold 6, then
SETTINGS