Door Reversibility - Zanussi ZYAN8EW0 Notice D'utilisation

RUBBER SUPPORTING PAD
There is no need to install this additional equipment
provided in a bag to your appliance during normal
use.
However, there is a risk the appliance become
unstable when all food products are placed only on
door shelves. In this case install the rubber
supporting pad:
1. Tilt the appliance carefully on a soft foam
packaging or similar material to avoid any
damage to the back of the appliance and the
floor.
2. Find a hole in a lower base cover and insert a
screw into the rubber supporting pad.
3. Screw it to the base cover with a cross
screwdriver.

DOOR REVERSIBILITY

WARNING! Before carrying out any
operations, remove the plug from the
power socket.
1. Make sure the appliance stands upright.
2. Open the door and remove the door
equipment. Refer to "Daily Use" chapter. Close
the door.
52
3. Unscrew the screws on the back of the top
cover.
4. Lift the top cover and place it on a soft surface.
5. Unscrew the 4 screws.
6. Lift the upper hinge and put it in a safe place
together with the screws.
7. Lift the door and put it on a soft surface.
8. Tilt the appliance carefully on a soft foam
packaging or similar material to avoid any
damage to the back of the appliance and the
floor.
9. Unscrew the screws of the bottom hinge and
adjustable feet.
10. Install the pin in the opposite hole of the hinge.
11. Screw the bottom hinge on the other side of
the appliance.