Choosing An Installation Location; Projector Installation Location - Epson EB-585Wi Guide D'installation

Using the Product Safely

Choosing an Installation Location

Projector installation location

• Carry out power supply wiring work for the installation location of the setting plate in advance.
• Install the projector away from other electric devices such as fluorescent lights or air conditioners. Some kinds of
fluorescent lights could interfere with the remote control of the projector.
• It is recommended to keep connection cable length less than 20 meters to reduce external noise.
• We recommend using stick-on screens or board screens.
• Make sure the projector is installed under the following conditions.
• The projected image is a rectangular shape without any distortion.
• The projector is tilted at an angle of no more than ±3° vertically and horizontally in relation to the screen.
• When using keystone correction, the gradation for vertical and horizontal keystone correction is no more than ±6.
• When using the interactive function (Easy Interactive Function), install so that the projected image is within reach
(EB-585Wi/575Wi only).
• Do not install the projector or the screen in a location subject to direct sunlight. If the projector or the screen are
subject to direct sunlight, the interactive function may not operate correctly (EB-585Wi/575Wi only).
4