Maintenance And Cleaning - Bosch PSR 9,6 VE-2 Instructions D'emploi

2 609 932 287 - Buch Seite 4 Mittwoch, 22. Oktober 2003 1:58 13
Replacing the Drill Chuck
Before any work on the machine itself, re-
move the battery.
The locking screw 13 secures the drill chuck
against loosening from the drill spindle. Fully
open the drill chuck and completely unscrew the
locking screw 13 by turning in clockwise direction
(see figure B ).
Loosening the Drill Chuck
(see figure )
C
Place the machine on a stable surface (e. g.
workbench). Hold the machine firmly and loosen
the chuck by turning to the left, as when unscrew-
ing a screw ( ). Loosen a tight chuck by giving
the long end of the Allen key 14 a sharp blow.
Tightening the Drill Chuck
(see figure )
D
The drill chuck is mounted in reverse order ( ).
Operating Instructions
Soft grip
The gripping surface 9 on the rear of the handle
(soft grip) reduces the danger of slipping and
thereby improves the grip on the machine and the
handling.
At the same time, the rubber coating achieves a
vibration-reducing effect.
Tips
Use only screwdriver bits that fit properly in the
head of the screw.
When driving in larger and/or longer screws in
hard material, it is advisable to drill a pilot hole
first.
For drilling in metal, use only perfectly sharp-
ened HSS drills. The appropriate quality is
guaranteed by the Bosch accessories pro-
gram.
12 • 2 609 932 287 • 03.10

Maintenance and Cleaning

Before any work on the machine itself, re-
move the battery.
For safe and proper working, always keep
the machine and the ventilation slots clean.
If the machine should fail despite the care taken
in manufacturing and testing procedures, repair
should be carried out by an after-sales service
centre for Bosch power tools.
In all correspondence and spare parts orders,
please always include the 10-digit order number
given on the nameplate of the machine.
Environmental Protection
Recycle raw materials instead of disposing as
waste
The machine, accessories and packaging should
be sorted for environmental-friendly recycling.
These instructions are printed on recycled paper
manufactured without chlorine.
The plastic components are labelled for catego-
rized recycling.
Defective or worn out batteries must be recycled
according to the guidelines 91/157/EEC.
Batteries no longer suitable for use can be
directly returned at:
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham-Uxbridge
Middlesex UB 9 5HJ
Service
............................
Advice line
....................
Fax
.............................................
English - 4
Nickel-cadmium-battery:
If your product is equipped
with a nickel-cadmium-bat-
tery, the battery must be
collected, recycled or dis-
posed of in an environmen-
tally-friendly way.
+44 (0) 18 95 / 83 87 82
+44 (0) 18 95 / 83 87 91
+44 (0) 18 95 / 83 87 89