Tool Specifications; Machine Elements; For Your Safety; Intended Use - Bosch PSR 9,6 VE-2 Instructions D'emploi

2 609 932 287 - Buch Seite 1 Mittwoch, 22. Oktober 2003 1:58 13

Tool Specifications

Cordless screwdriver
Order number
No-load speed
1st gear
2nd gear
Torque adjustment range [Nm]
max. torque for hard/soft
screwdriving application
according to ISO 5393
Maximum drilling Ø
(1st/2nd gear)
Steel
Wood
Screw diameter, max.
Chuck clamping range
Drill spindle thread
Weight without battery,
approx.
Battery
Temperature control
Rated voltage
Capacity
Weight, approx.
Please observe the order number of your machine. The trade names of the individual machines may vary.

Machine Elements

1 Gear selector
2 Torque setting ring
3 Keyless chuck
4 On/Off switch
5 Rotational direction switch
6 Screwdriver bit*
7 Battery*
8 Battery unlocking button
9 Soft grip
10 Display
11 Screwdriver attachment (bit)*
12 Universal bit holder*
13 Locking screw
14 Allen key*
* Not all of the accessories illustrated or described are
included as standard delivery.

Intended Use

The machine is intended for the screwing in and
loosening of screws as well as for drilling in wood,
metal, ceramic and plastic.
9 • 2 609 932 287 • 03.10
PSR 9,6 VE-2 PSR 12 VE-2
0 603 943 6.. 0 603 943 5..
[rpm] 0 – 390 0 – 390
[rpm] 0 – 1 250 0 – 1 250
0.7 – 9.0 0.7 – 9.0
[Nm] 22/8 24/12
[mm] 10/8 10/10
[mm] 18/16 20/19
[mm] 6 6
[mm] 1 – 10 1 – 10
3/8" 3/8"
[kg] 1.0 1.0
NTC NTC
[V=] 9.6 12
[Ah] 1.5 1.5
[kg] 0.5 0.6
general safety notes in the enclosed booklet
must be observed.
English - 1
PSR 14,4 VE-2
0 603 943 4..
0 – 400
0 – 1 250
0.7 – 9.0
30/16
10/10
28/20
7
1 – 10
3/8"
1.0
NTC
14.4
1.5
0.75

For Your Safety

Working safely with this ma-
chine is possible only when the
operating and safety information
are read completely and the in-
structions contained therein are
strictly followed. In addition, the
Wear safety goggles.
For long hair, wear hair protection. Work only
with closely fitting clothes.
Before each use, check the machine and bat-
tery. If damage is detected, do not use the ma-
chine. Have repairs performed only by a qual-
ified technician. Never open the machine your-
self.
Before any work on the machine itself (e. g.
maintenance, tool change, etc.) as well as
when transporting and storing, always set
the rotational direction switch to the centre
position. Otherwise danger of injury is given
when unintentionally actuating the On /Off
switch.
PSR 18 VE-2
0 603 943 3..
0 – 400
0 – 1 250
0.7 – 9.0
42/22
12/12
30/22
8
1 – 10
3/8"
1.2
NTC
18
1.5
1.0