Panasonic CF-VDL02BM Instructions D'utilisation page 15

(Position)
Image Position
H-Position
V-Position
Auto Center
(Image)
Image
Phase
Clock
Auto Phase
The Position menu allows the adjustment of image po-
sition in Analog input mode.
Select the item by pressing
H-Position
H-position is used to adjust the horizontal image posi-
tion manually. A slider and the current value are dis-
played. The adjustment range is 0 to 127.
Adjust by pressing
and then turn off the power to the LCD Monitor. When
the power is turned on again, the operation will be canceled.)
V-Position
V-position is used to adjust the vertical image position
manually. A slider and the current value are displayed.
The maximum value for Vertical Position is to 1 to 47.
(Depending on the RGB input signal, the upper value
of this range may be below 47.)
Adjust by pressing
press and then turn off the power to the LCD Moni-
tor. When the power is turned on again, the operation
will be canceled.)
Auto Center
A confirmation box is displayed. The default selection
is [Yes]. Press to adjust the position automatically.
If you want to cancel, select [No] and press
To save the adjusted value, select [H-Position] or [V-
Position], then press
The image menu allows the adjustment of ADC clock
and phase in Analog input mode.
Select the item by pressing
Phase
Phase adjustment is used to adjust the phase of ADC sample
pixel clock. A slider and the current value are displayed.
The adjustment range is 1 to 31, representing 0-360 degrees.
Adjust by pressing
and then turn off the power to the LCD Monitor. When
the power is turned on again, the operation will be canceled.)
Clock
Clock adjustment is used to adjust the number of ADC
sample clocks per line (samples per line). A slider and
the current value are displayed.
Adjust by pressing
and then turn off the power to the LCD Monitor. When
the power is turned on again, the operation will be canceled.)
or , then press
or , then press . (To cancel, press
or , then press
.
or , then press
or , then press . (To cancel, press
or , then press . (To cancel, press
.
E
. (To cancel,
.
.
15