Centrifugation With Time Preselection; Short-Time Centrifugation - Hettich Mikro 220 R Mode D'emploi

Table des Matières
Les langues disponibles

Les langues disponibles

Operation
6.5.2

Centrifugation with time preselection

6.5.3

Short-time centrifugation

26 / 39
[START/IMPULS] button.
2.
Press the
�� The centrifugation run is started.
[START/IMPULSE] button lights up during the centrifugation
The
run.
The timing starts at
The rotor speed or the RCF value, the temperature in the centri-
fuging chamber (only for centrifuges with cooling) and the elapsed
time are displayed during the centrifugation run.
[STOP/OPEN] button to cancel the centrifugation run.
3.
Press the
Ramp-down takes place with the set brake level. The brake level is
displayed.
An audible signal sounds when the rotor comes to a standstill.
'OPEN' 'OEFFNEN' is displayed.
Personnel:
Trained user
1.
Set centrifugation parameters or retrieve a program.
[START/IMPULS] button.
2.
Press the
�� The centrifugation run is started.
[START] button lights up during the centrifugation run.
The
The rotor speed or the RCF value, the temperature in the cen-
trifuging chamber (only for centrifuges with cooling) and the
remaining time are displayed during the centrifugation run.
3.
Ramp-down takes place with the selected brake level after the time
has elapsed or if the centrifugation run is cancelled.
�� The brake level is displayed.
An audible signal sounds when the rotor comes to a standstill.
'OPEN' 'OEFFNEN' is displayed.
The right side of the
centrifuge is in ramp-down.
The left side of the
at a standstill.
The light on the
[STOP/OPEN] button go out.
Personnel:
Trained user
1.
Press and hold the
[START/IMPULS] button lights up during the centrifugation
�� The
run.
Timing starts at 00:00.
The rotor speed or the RCF value, the temperature in the centri-
fuging chamber (only for centrifuges with cooling) and the elapsed
time are displayed during the centrifugation run.
Rev.: 15 / 01.2024
'00:00' .
[STOP/OPEN] button lights up when the
[STOP/OPEN] button lights up when the rotor is
[START/IMPULS] button and the right side of the
[START/IMPULS] button.
AB2200en
Table des Matières
loading

Ce manuel est également adapté pour:

Mikro 220

Table des Matières