Gaggia Milano VIVA STYLE Mode D'emploi page 12

English
12
Note: The pressurized filter holder automatically tamps the ground coffee. There is no need to
tamp the ground coffee yourself.
8 Insert the ground coffee filter into the pressurized filter holder (Fig. 17).
Note: When you use the machine for the first time, the ground coffee filter is already inserted.
9 Insert the filter holder into the brew unit.
10 Turn the filter holder from left to right until it locks into place and release the filter holder grip (Fig.
12). The handle will jump back to the left slightly.
11 Place one or two cups under the pressurized filter holder (Fig. 18).
Note: Make sure the cups are placed correctly under the coffee dispensing openings.
12 Turn the selection knob to the coffee position.
- The machine starts brewing coffee.
13 Turn the selection knob to the standby position when the cup(s) contain(s) the desired amount of
coffee.
14 Remove the pressurized filter holder and empty it. Clean the pressurized filter under a running tap.
Brewing coffee with coffee pods
Note: Only use the coffee pod filter and coffee pod filter adapter with coffee pods
1 Use a teaspoon to remove the ground coffee filter from the pressurized filter holder (Fig. 19).
2 Insert the pod filter adapter with the convex side facing down into the pressurized filter holder (Fig.
20).
3 Place the coffee pod filter on top of the pod filter adapter in the filter holder (Fig. 21).
4 Insert the pressurized filter holder into the brew unit from below (Fig. 11).
5 Turn the filter holder from left to right until it locks into place and release the filter holder grip (Fig.
12). The handle will turn to the left slightly.
Note: For the first coffee brewing session, you need to preheat the pressurized filter holder.
6 Brew one cup of water. Turn the selection knob to the standby position to stop brewing (Fig. 9).
7 Turn the filter holder from right to left to remove it from the machine and pour out the remaining
water (Fig. 15).
8 Insert a coffee pod into the filter holder (Fig. 22).
Note: Make sure the paper of the pod does not stick out beyond the edge of the filter holder.
9 Insert the filter holder into the brew unit from the below.
10 Turn the filter holder from left to right until it locks into place and release the filter holder grip. The
handle will turn to the left slightly.
11 Place a cup under the filter holder.
12 Turn the selection knob to the coffee position (Fig. 8).
- The machine starts brewing coffee.
13 Turn the selection knob to the standby position when the cup contains the desired amount of
coffee.
14 Remove the filter holder and throw away the used coffee pod.
Gaggia Viva WEU_export_30029_72.indd 12 21/12/2018 10:55:48