LawnMaster MEB1016M R Guide D'utilisation page 23

MAINTENANCE
REPLACING WHEELS (See Fig. 23)
To replace a wheel:
■ Disconnect the mower from the power supply.
■ Turn the mower on its side.
■ Using a flat blade screwdriver, pry off the hubcap.
■ Remove the wheel,replace with new wheel .
■ Replace hubcap.
STORING THE MOWER (See Fig. 24)
■ Disconnect the mower from the power supply.
■ Turn mower on its side and clean grass clippings that have accumulated on the underside of the
mower deck.
■ Wipe the mower clean with a dry cloth.
■ Chec all nuts, bolts, nobs, screws, fasteners, etc., for tightness.
■ Inspect moving parts for damage, brea age, and wear. Have repairs made on any damaged or
missing parts.
■ Store mower indoors in a clean, dry place out of the reach of children.
■ Do not store near corrosive materials such as fertilizer or rock salt. To lower the handle before storing:
■ Fully loosen the handle cam loc s on the sides of the handle and fold the upper handle down.
■ Push inward on each side of the lower handle, and lift the sides of the lower handle past the
edges of the handle mounting brackets.
■ Fold the lower handle forward, ma ing sure not to bend or in the power cord.
HANDLE CAM LOCK S HANDLE CAM LOCK S
Fig. 24 Fig. 24
23
UPPER UPPER
HANDLE HANDLE
LOWER LOWER
HANDLE HANDLE
ASSEMB ASSEMBLY
FIXED FIXED
PLATE PLATE A ATE
Fig. 23