Yamaha CD-N500 Mode D'emploi page 11

E CLEAR (☞ P.19)
Erases the last programmed track of an audio CD (except
data CDs) during program editing mode.
F PROGRAM
Turns on or off program playback mode. In program
playback mode, you can playback tracks of an audio CD
(except data CDs) in a programmed sequence. For details,
see "Using program playback mode" (☞ P.19).
G A/B
Repeats playback of a specified section of a track during
audio CD playback (except data CDs). To set the starting and
end points (A and B), press A/B twice during playback.
To cancel the repeat A-B function, press A/B again.
y
• A data CD is defined as a disc in which MP3 or WMA files
are recorded.
• You cannot set the repeat A-B function over two tracks.
• You cannot set the repeat A-B function for data CDs and
USB devices.
• The repeat A-B function is canceled when
pressed.
• You cannot set the repeat A-B function when this unit is in
PURE DIRECT mode.
• You cannot set the repeat A-B function when the unit is
showing the remaining playback time of the track or disc in
the front panel display.
H
(Search backward),
(☞ P.18, 21)
Searches tracks backward/forward while the button is
pressed and held during playback.
I RETURN (☞ P.14, 16, 21, 22)
Shows the upper-level menu in the front panel display.
J MODE (☞ P.21)
Switches between standard mode and extended mode when
playing back your iPod.
K Amplifier control buttons
Controls the corresponding functions of a Yamaha amplifier.
A (Power)
Turns your amplifier on and off.
INPUT ( / )
Switches input sources.
VOLUME ( / )
Adjusts the volume.
MUTE
Turns mute on or off.
For details on operations, refer to the manual of your
amplifier.
y
These buttons may not work for some Yamaha amplifiers.
(Stop) is
(Search forward)
CONTROLS AND FUNCTIONS
7
En