General Notes; Symbols; Safety Notes; Scope Of Delivery - Burkert 2030 Instructions De Service

GENERAL NOTES

Symbols

The following symbols are used in these operating instructions:
marks a work step that you must carry out
CAUTION!
marks notes on whose non-observance your health or the functioning of the device will be
endangered
marks important additional information, tips and recommendations
NOTE

Safety notes

Please observe the notes in these operating instructions together with the conditions of use and permitted
data that are specified in the data sheets of valve with pneumatic drive unit, in order that the device will
function perfectly and remain operable for a long time:
• Keep to standard engineering rules in planning the use of and operating the device!
• Installation and maintenance work are only allowed by specialist personnel using suitable tools!
• Observe the current regulations on accident prevention and safety for electrical devices during
operation and maintenance of the device!
• Note that in systems under pressure, piping and valves may not be loosened!
• Take suitable precautions to prevent unadvertent operation or damage by unauthorized action!
• After interruption of the electrical or pneumatic supply, make sure the process is restarted in a well-
defined, controlled manner!
• On non-observance of these notes and unauthorized interference with the device, we will refuse all
liability and the warranty on device and accessories will become void!

Scope of delivery

Immediately after receipt of a shipment, make sure that the contents are undamaged and match the
scope of delivery stated on the packing slip.
If there are discrepancies, please contact immediately your Bürkert subsidiary or our customer service:

Warranty conditions

This document contains no warranty statements. In this connection we refer to our general sales and
business conditions. A prerequisite for validity of the warranty is use of the device as intended with
observance of the specified conditions of use.
CAUTION!
The warranty covers only faultless condition of valve Type 2030, 2031K with pneumatic
drive. No liability will be accepted for consequent damage of any kind that may arise from
failure or malfunctioning of the device.
2 - 2030/2031K big
Bürkert Fluid Control Systems
Service Department
Chr.-Bürkert-Str. 13-17
D-76453 Ingelfingen
Tel.: (07940) 10-111
Fax: (07940) 10-448
E-Mail: info@de.buerkert.com